"One-Touch Set-Up" Speed Control. Can be used with STOCK or
    ANY MODIFIED MOTORS.

Dually Dual Profile has user-selectable
    Modified or Stock Profiles for customizing performance.

FEATURES: New current limiter circuitry ("CLC III") allows the modeler to adjust the power (current) to the motor to help prevent the wheels from spinning during heavy acceleration. "One-Touch Set-Up" allows for a quick and easy speed control setting "Radio Priority Circuitry" to maintain control of the radio even after the battery pack has dumped User-selectable Modified and Stock Profiles Thermal Overload Protection Polar Drive Technology Digital glitch prevention Reverse voltage protection ("RVP") Universal receiver plug preinstalled for the following radios: Airtronics Z, Futaba J, JR, KO, Kyosho, Tower Hobbies, Hitec. HyperFet transistors 14 gauge silicone wire to handle more current

INCLUDES: One Speed control with current limiter dial & Universal RX Connector One Small Purple Anodized Heatsink One Large Purple Anodized Heatsink One Motor capacitor kit (three 0.1 µF capacitors) One Double sided mounting tape (1" x 1") One 12 gauge silicone wire for motor (9") One Schottky diode (one, silver leg goes to Positive) One One-touch tool, instructions, service card and decal sheet

REQUIRES: Speed control-to-motor, no solder leads. Speed control-to-battery, battery plug.

SPECS: FORWARD ONLY (No Reverse) Voltage input: 4 to 7 cells Case size (w/o heatsinks): 1.63" x 1.72" x 0.65" Weight (w/o heatsinks): 2.10 oz On-resistance: 0.00070 Ohms Rated current: 400A Braking current: 100A BEC Output Amperage: 3A BEC Output Voltage: 6V