Radio controlled, electric powered, foam construction
Multiplex Easy Star ARF airplane model.
For Beginner to Intermediate Modeler/Fliers.
FEATURES: Construction: Elapor foam on the fuselage, wing and tail
section Wings: two-piece, foam construction, blue in color Radio
compartment: Foam Landing gear: No landing gear,model lands on its
belly Hardware: Pushrods and other hardware included Motor Mount:
Molded into the foam fuselage 400 size Permax motor with high current
socket and lead 5" diameter pusher prop with black spinner (prop faces
the rear of the airplane) Colorful Easy Star logo decals (must be cut
out and applied) Ready to fly in two to six hours
INCLUDES: Foam fuselage, wings, and tail section, 400 size motor
(direct drive) with connector and lead (must be soldered to motor),
prop, spinner, hardware package, decals and illustrated instructions.
REQUIRES: 3-channel radio (throttle, rudder, and elevator control)
with 2 micro servos 12 amp speed control, 6 or 7 cell battery from 500
to 1500mAh
SPECS: Wingspan: 54" (1370mm) Wing Area: 372 sq in (24 sq dm)
Weight: 24oz. (680 g) Length: 34" (870mm) Airfoil: Flat bottom, high
wing Center of Gravity: 3.07" (78mm) Back from the wing's leading edge
at the fuselage sides. Control Throws- Elevator: Up & Down 3/16" (5mm)
Rudder: Right & Left 3/8" (10mm) |
