Goldberg Wild Stik .40 3-D Aerobatic Sport Airplane.
    Capable of knife-edge loops, torque rolls,
        climbing inverted, flat spins and harrier landings.

Radio controlled, glow powered, almost-ready-to-fly!

For Intermediate to Advanced Modeler/Flyers.

FEATURES: Construction: All balsa and ply Wings: One piece, all wood Covering: Premium iron-on color scheme is red, black and yellow Radio Compartment: Plywood construction Landing Gear: Pre-formed aluminum 2.5" (63mm) wheels, 1" (25mm) tailwheel Aileron Control: 4 servos (can be set up with 4 ailerons or 2 flaps and 2 ailerons) Rudder Linkage: Pull-pull design Control Surfaces: Oversized and double beveled for high aerobatic performance speed maneuvers, perform enhanced flight configurations when combined with ailerons and elevator, or they can be set up as extensions of the ailerons for added throws Fuel Tank: 10.8 oz (320cc) Building Time: Ready to fly in only 6-8 hours Rudder: Push-pull for superb aerobatic performance Warranty Period: Goldberg warrants that for a period of 90 days, it will replace, at the buyers request, any part or material shown to the company's satisfaction to have been defective in workmanship or material at the time of purchase

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent main landing gear, 2mm diameter tailwheel wire, 2.5" main wheels, 1" tailwheel, nylon adjustable engine mount, 10.8oz fuel (320cc) fuel tank, wood servo trays and wing joiner, wild stik logo decals, hardware package and photo-illustrated instructions

REQUIRES: Engine: .40 - .50 cu in (6.5 - 8.0cc) 2-stroke OR .50 - .70 cu in (8.0 - 11.5cc) 4-stroke Muffler: Standard muffler, engine is side mounted Radio: 4-Channel minimum Servos: 7-Standard (4-Aileron, 1-Elevator, 1-Throttle, 1-Rudder) (a high torque servo is suggested for the rudder, but not required) Servo Extension 12": qty. 2 (for outer aileron servos) Y-Harness: qty. 2 for flap and aileron set up or 3 if you are going to use all four servos as ailerons Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment.

SPECS: Wingspan: 52.5" (1803mm) Wing Area: 728 sq in (47 sq dm) Flying Weight: 4.5 - 5.0lb (2.0 -2.3kg) Wing Loading: 15.05 oz/sq ft (45.92 g/sq dm) Length: 44" (1120mm) Airfoil: Fully symmetrical, high wing Center of Gravity: 4" (101mm) Back from the wing's leading edge Control Throws- High Rate Low Rate Elevator: Up & Down All you can get 1" (25mm) Rudder: Right to Left All you can get 2" (50mm) Ailerons: Up & Down All you can get 1/2" (12mm)