Great Planes U-Can-Do 3D Almost-Ready-to-Fly,.46 Aerobatic Airplane.
Slow flight characteristics suitable for first time low wing pilots.
Increase control throws to 3D levels for thrilling aerobatic performance.
For Intermediate to Advanced Modeler/Flyers.
FEATURES: Construction: Balsa and plywood. Wings: One-piece all
wood, attaches to fuselage with two 1/4-20 nylon wing bolts
(included). Fully symmetrical, mid-wing placement. Covering: Factory
applied Top Flite MonoKote. Color scheme is white with swirls of
red, dark blue, and yellow on the tail and wing sections. Bottom of
wing is large blue and white checkerboard pattern. Cowling:
Pre-painted white fiberglass-reinforced cowl and wheel pants.
Canopy: Single, clear plastic. Landing Gear: 0.12" (3mm) thick
pre-formed aluminum. Dual Aileron Servos: Standard size with at
least 50 oz/in of torque. Building Time: Ready to fly in as little
as six to eight hours. Warranty Period: Great Planes warrants this
kit to be free from defects in both material and workmanship at the
date of purchase. This warranty does not cover any component parts
damaged by use or modification.
INCLUDES: Pre-built and covered wings, fuselage and tail
assemblies, pushrods, pre-bent 0.12" (3mm) main landing gear, 0.08"
(2mm) tailwheel wire, 2-1/4" (57mm) main wheels, 1" (25mm) tailwheel,
nylon adjustable engine mount, 8 oz (270cc) fuel tank, 2" (51mm) red
spinner, plywood servo trays, hardware package, decals, and
photo-illustrated instructions.
REQUIRES: Engine: .32 -.50 (5-8 cc) (2-stroke) OR .52 -.70
(8-11cc) (4-stroke)
NOTE: For maximum 3D aerobatic performance, choose an engine in
the upper power range. The O.S. Max .50SX (OSMG0550)
is an ideal engine to utilize the full aerobatic potential of this
airplane.
Muffler: Stock type supplied with engine. Engine mounts in
inverted position. Radio: Four channel minimum, Six channel
computerized radio recommended for maximum flexibility and
performance. Servos: Standard size 2 ball bearing-Aileron, 2 ball
bearing-Elevator 1 high torque-Rudder, 1 standard-Throttle. Servo
Extensions: Two 6" (152mm) for ailerons and one 24" (610mm) for
rudder and two 24" for elevator. Y-Harness: One, for aileron servos,
unless using computer radio. Servo reversing y-harness for elevator
servos unless using comp radio Misc. Items: Glow plug, 1/4" foam
rubber padding, medium fuel tubing, fuel filter, propeller, building
and field equipment.
SPECS: Wingspan: 56.75" (1441mm) Wing Area: 904 sq in (58.3 sq
dm) Weight: 5 - 5lbs 10 oz (2268-2551g) Wing Loading:12.7-14.3 oz/sq
ft (39-44 g/dm2) Incidence: Wing: 0 Stab: 0 Engine: 1.5 down, 2
right Length: 58.5" (1486mm) Airfoil: Fully-symmetrical mid-wing
Center of Gravity: 4-3/4" (120mm) Back from the wing's leading edge
Control Throws- Elevator: High Rate(3D) Up & Down 2-1/4"(57mm)
Low Rate 1" (25.5mm) Rudder: High Rate(3D) Right & Left 3-1/2"
(89mm) Low Rate 1-1/2" (38mm) Ailerons: High Rate(3D) Up & Down
2-1/2" (63.5mm) Low Rate 1-1/4" (32mm) |
