Hobbico NEXTAR Select Trainer with FREE SHIPPING!

Radio controlled, glow powered, ready-to-fly,
       Hobbico NexSTAR Select .46 trainer airplane.
                  Great for Beginner Modeler/Fliers.

With such features as AFS (Active Flight Stabilization), SpinControl Airfoil Extensions, SpeedBrakes Training Flaps and much more, no other trainer offers so much help for the first-time pilot.

In addition to the airplane, radio, and engine, this package also includes a RealFlight NexSTAR Windows PC disc with transmitter interface to use with the included Futaba radio allowing the modeler to practice and perfect their skills without risking the airplane.

MINIMUM SYSTEM REQUIREMENTS FOR THE NEXSTAR SIMULATION SOFTWARE: Windows XP, 2000, Me or 98 Second Edition NOTE: Window 98 First Edition is not supported with the NexSTAR simulation software Intel Pentium 300 Processor or equivalent 3D accelerated video card with 8MB (or more) RAM

OPTIMUM SYSTEM REQUIREMENTS FOR THE NEXSTAR SIMULATION SOFTWARE: Intel Pentium 600 or equivalent STRONG RECOMMENDATION of 3D accelerated video card with 16MB (or more) RAM

NOTE: The NexSTAR disk included in this kit is NOT compatible with any version of the RealFlight Add Ons Volumes.

FEATURES: Construction: Balsa and plywood Wings: CenterCore Molded Composite Main Wing Rib maintains perfect alignment and includes a built-in aileron servo mount, wing halves are joined with a steel rod. Flat bottom high mount configuration One-piece, all wood precision airfoil with SpinControl Airfoil Extensions that provide lift even in a stall to keep the NexSTAR level and the pilot in control. PivotFlex Wing Mounting System fastens with one nylon bolt, a rubber retainer and pivoting channel absorb minor jolts of normal use, more severe jolts cause the wing to separate from the fuselage and escape the full force of impact. Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward section of wing near fuselage and hold airspeed to a minimum to insure smooth landings, removeable as pilot skills increase Covering: Polyester based heat shrink, color scheme is white and red with silver accents Engine: Pre-installed O.S. Max .46FXi (7.5cc) with high-speed needle valve extender/limiter that limits the movement of the high-speed needle to prevent engine from being run too lean, engine is mounted on IsoSmooth Mount to isolate airframe and radio gear from damaging vibration Radio: Futaba 4YBF 4-channel FM radio system with trainer system and AFS (Active Flight Stabilization) that actively searches for any signs of instability and takes immediate action to correct them. This system uses on-board electronic sensors that detect instability-just release the sticks and AFS does the rest. Sensitivity is adjustable as pilot gains flight skills. Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts lock in place with a snap and provide the strongest landing gear of any trainer, also easily removeable Aileron Control: Single standard size servo, wings are built with dual aileron servo trays for future upgrades as skills increase, can also be equipped with flaps Tail Mounting: EasyAlign System guides parts into place automatically in perfect alignment without tools Propeller: 11x5 nylon, black in color with painted tips to aid visibility-available separately, HCAA3744 Building Time: Ready to fly in only 20 minutes

Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component part damaged by use or modification.

The NexSTAR also carries the Success Flight Guarantee which states" "You will successfully learn how to fly with the NexSTAR or we will replace it with your choice of any Hobbico trainer of up to equal value." The terms are as follows:

- Must fly at an AMA chartered field - Must fly with a qualified AMA club instructor - Must be within 60 days of purchase date - Must provide a statement abut the crash with signatures from the pilot and instructor

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, 2-56 threaded pushrods in lengths of 31", 31", 17", 15" (GPMQ3716) pre-bent main landing gear with three 2-3/4" (70mm) foam main wheels, steerable nose gear, IsoSmooth aluminum and rubber engine mount, 9.1oz (270cc) fuel tank, 2-1/4" (57mm) white plastic spinner glow plug, 11x5 nylon propeller, RealFlight NexSTAR disc with transmitter interface, O.S. Max .46 FXi engine, Futaba 4YBF 4-ch radio system with Tx battery (FUTM1440) Rx battery (FUTM1295) Charger (FUTM1830),AFS Dual Conversion Receiver,linkages, and and photo-illustrated instructions.

REQUIRES: Model airplane fuel Building and field equipment Charging Rx and Tx batteries with included charger for 12 hours each.

SPECS: Wingspan: 68.75" (1740mm) Wing Area: 722 sq in (46sq dm) Weight: 6.5 lb (2930g) ready to fly Wing Loading: 21 oz/sq ft (63g/sq dm) Length: 56" (1420mm) Airfoil: High-Wing Center of Gravity: 3-3/16" (81mm) forward limit 3-9/16" (90mm) aft limit from the wing's leading edge at the fuselage sides Control Throws- Elevator: Up & Down 1/2" (13mm) Rudder: Right to Left 3/4" (19mm) Ailerons: Up 1/2" (13mm) Down 3/8" (9mm)